Printed Circuit Boards

Find out what makes our PCBs the best choice out of all the circuit boards in the industry.

Lead Time

Quality Control

Production Capabilities

Surface Finishes & Materials

Inspection

Value Added Services

Request A Quote

Lead Time

Domestic:

Prototypes

Double Sided: 24-48 Hours + Transit (cut off 9:00 a.m. PST)
Multilayer: 24-48 Hours + Transit (cut off 9:00 a.m. PST)

Pre-Production

Double Sided: 3-4 Days + Transit
Multilayer: 4-5 Days + Transit

Off Shore:

Prototypes

Double Sided: 3 Days + Transit
Multilayer: 4 Days + Transit

Pre-Production

Double Sided: 4-5 Days + Transit
Multilayer: 5-6 Days + Transit

Mass Production

Repeat P/Ns: 2-3 Weeks + Transit
New P/Ns: 3-4 Weeks + Transit

Quality Control

Quality Controls:

All suppliers have UL certifications and ISO Certifications
All suppliers work to IPC standards ( IPC 600 Rev F www.ipc.org )

Testing: PCBs are tested at the highest level which includes but is not limited to:

Automated Optical Inspection (AOI)
Electrical Test (E-Test/100% Net List Test)
High Pot Testing Available

Documentation: Each Shipment of PCBs include the following documentation:

Certificates of Conformance (CofC)
Electrical Test Certificates
Cross Section Analysis
High Pot Test Certificates
Solder Samples (included upon request)

Production Capabilities

Standard Circuit Boards

Single Sided
Double Sided

Multilayer

4-20 Layer Boards
004" Line Width
004" Air Gap

Minimum Circuit Board Thickness

.008" (2 layer)
.016" (4 layer)
.016" +/- 0.004" (6 layer)
.032" +/- 0.004" (8 layer)

Maximum Circuit Board Thickness

.250"

Maximum Panel Size

24" x 28"

Minimum Finished Hole Size

.008"

Controlled Impedance

+/- 10%

Value-Added Capabilities

Blind Vias
Buried Vias
Micro Vias

Fabrication

N/C Routing
V-Scoring/Punching

IPC-A-600 Rev G

Surface Finishes & Materials

Surface Finishes

Hot Air Solder Level (HASL)
Pb-Free HASL
Entek
Immersion Gold (ENIG) 2-5u"
Electro-Plated Gold (HARD)
Carbon Ink
Gold Fingers (>30u")

Solder Mask

LPI Standard

Board Materials

FR-4 (130°C Tg)
FR-406 (170°C Tg)
CEM
Rogers
Teflon
Polyimide
BT Resin

Inspection

Automated Optical Inspection (AOI)
Electrical Test
Flying Probe Test

(E-Test/100% Net List Test)
High Pot Testing Available
IPC 600 Rev.